DRILLING
RADIAL DRILL WAKAYAMA
- Radial Drill, 1000mm(39.4″)～1300mm
- Radial Drill 36~1700rpm
- Colum sleeve : 305mm
- Vertical travel distance320
- Base : 1.3*0.8M
- Size : W2.1*D0.9*H2.5M
- Made in : Japan
KIWA
- Drilling capacity in steel St 60 55 mm
- Drill spindle holder long spindle MK 4
- Drilling spindle speeds AZ gearbox continuously in 2 speed series 40-760 rpm
- Drilling spindle stroke 140 mm
- Projection 300 mm
- Column diameter 145 mm
- Combination drill table with insertion vise
- Table with 2 T-slots 440 x 440 mm
- Distance table drill spindle min. / Max. 35/640 mm
- Decency drill spindle – machined foot plate approx. 1150 mm
- 3 feed rates 0,10 – 0,20 mm / rev
- Drive 400 V / 1.8 / 2.9 kW
- Space required approx. W 600 x H 1800 x D 950 mm
- Weight about 380 kg
RADIAL DRILL OOYA
- Diameter of column : 12-5/8″
- Column surface to spindle center, max. 49-3/8″
- Column surface to spindle center, min. 11-5/8″
- Spindle speeds (24) 32 to 1985 RPM
- Feeds (6) .003 to .039
- Spindle taper MT #5
- Diameter of spindle 2-3/8″
- Diameter of quill 3-1/16″
- Vertical travel of spindle 11-13/16″
- Horizontal travel of spindle head 37-3/4″
- Vertical travel of arm 25-5/8″
- Base to spindle, maximum 51-3/4″
- Base to spindle, minimum 13″
- Drilling capacity, steel 2-1/4″
- Drilling capacity, cast 2-5/8″
- Motor 5 HP / 1730 RPM
- Volts 220 / 440
- Phase 3
- Hz 60
- Amps 13.4 / 6.7
- Approximate dimensions 75″ x 35″ x 85″ high
- Approximate weight 6,100 lbs.
Model BMC-2015 X-axis X-axis(mm) 2100 Y-axis(mm) 1500 Z-axis(mm) 800 Distance from spindle nose to table surface(mm) 200-1000 Distance between two columns(mm) 1650 Table Table Dimension(X)(mm) 2000 Table Dimension(Y)(mm) 1400 Max. loading capacity(kgs) 6000 Spindle Spindle speed(ST) (rpm) 6000( roller 4000 Op.) Spindle speed(OP) (rpm) 8000/10000 Spindle taper (type) #50 Spindle bearing bore diameter (mm) Ø100 Spindle motor output continuous/30mins)(kw) 15/18.5 Feed Rapid travel rate((X/Y/Z)(m/min) 20/20/15 ATC ATC cam type Tool magazine capacity(tools) 30 Tool shank type(sec) BT50/CAT50 External dimension Width(mm) 7000 Length(mm) 4200 Height(mm) 4250 Net weight(kgs) 23500